Universal Adjustable Phone and Small Tablet Stand My remix of bobamason's model, INCLUDING assembly pins! • Holds most larger phones and small tablets. • Adjustable from about 50 degrees to 90 degrees. • Loose pins for easy movement. • Includes three separate, editable STL files • Includes one full model, ready-to-print STL for a single print ~ (Read instructions for helpful notes!) ~ IMPORTANT / HELPFUL NOTES: • ALL 3 FILES ARE SIZED TO FIT EACH OTHER initially. If you are going to change the scale of your print, make sure you do it equally for ALL 3 STL files or your pieces won't fit together! OR, simply use the "Full Model (Single Print).stl" file. • Remember to sand pieces if necessary • Print with a 3-4mm brim (at least on file 3, so the pins don't fall over) • Glue pin "caps" onto each pin end to better secure your print