I just wanted to put a goodluckbuy modified gimbal in front of my xugong... A bit heavy, but it works flawlessly. this plate replaces the original front plate, and you just need 2x M3x40 screws to go all the way throught the face plate, and lock nuts. It matches the original holes by the way, and take care, the plate is not symetrical, the holes that goes through for fixing on the frame are made so the face plate comes flush with the to plate.print it with the resolution you want. I used 25 % infill, and 3 walls and 2 layers for bottom and top. You may have to re drill the holes, and you'll need 2 M3x40 mm with nylon lock nuts.