Find the new simplified v2 Name Keyring maker here http://www.thingiverse.com/thing:1148986 now with sliders for spacing and height adjustmentCustomizable Text Keyring, make one for your significant other! show them that the expense is justified after all!! Uses the recently added openSCAD text() function, which allows the use of almost any regular font. Change Log:Version 1.4: 22/11/2015Version 1.3: - 16/11/2015Printer Brand: RepRapPrinter: OrmerodRafts: Doesn't MatterSupports: Doesn't MatterResolution: 0.2Infill: 20%Uses the recently added openSCAD text() function, which allows the use of almost any regular font. Choose a Font Enter the text you want, it works best with <10 letters Adjust the spacing of the characters so they touch each other, you must enter an array containing the same amount of number as you have letters (e.g. [12.5,12.5,12,10.5,10] for 5 letter name) Adjust the height of each letter, between 5 and 10mm works best, you must enter an array containing the same amount of number as you have letters (e.g. [10,7.5,8.8,7.5,10] for 5 letter name) Tweak the twist and center as desired. Adjust the key loop position so it is touching the first letter Print It! I printed mine in PLA with a 0.2mm layer height.