I purchased a 3/16" sheet of glass and had trouble keeping it locked in place with other clips. This clip does not require you to remove the hex nut and can be secured with just a wingnut for easy removal. I replaced the original M3 screw with a M4 screw that came in the extra bag of parts with my printer. It should be the same screw that's used on the bed leveling springs The aluminum plate was able to still fit the head of the screw flush so the glass still lays flat. Feel free to edit on thingiverse if it doesn't quite fit your needs. Its easy to adjust the height of the gap to adjust for your bed thinkness in my model: https://www.tinkercad.com/things/k8rtqyWDlry-316-flash-forge-glass-bed-clip/ Link to glass bed I purchased (9x6" Borosilicate Glass): http://www.mcmaster.com/#8476k74/=ytj4ft Rafts: NoSupports: NoResolution: .3mmInfill: 15%Notes: PLA (you should print in ABS if you can) 225C 60C bed 2 shell 3 top and bottom layers (probably doesnt matter...)
- 0 inches x 0 inches x 0 inches
- this product is 3D printed
- 16 available colors
- material is a strong plastic
- free delivery by May 05
- 0 parts