With this mount you can modify your Witbox with the Diamond Hotend to print with multi-color and multi materials. The mount is in two pieces so you can easily service the Diamond Hotend. For cooling of the printed parts we recommend mounting a radial blower. The carriage mount will fit exactly on the linear bearings on the Witbox and click in place. No need to disassemble the Witbox. The belt will slide into a fixed position on the carriage. The tip of the Diamond nozzle are positioned in the same place as the original nozzle, but approx. 5mm higher. This will give you additional build height, but your will probably need to move the Z-endstop. The lasercut T-mount can be used to mount the 3 extruder motors and hold an additional filament spool. This mount is still "work in progress" until we have made the full guide. User guide will be added when available...