I remixed the Ganesha Murty model from http://www.thingiverse.com/thing:39730 and added a 30mm circular beveled base.Remixed with a 30mm base with Meshmixer (file attached). In Meshmixer, I needed to crop off the bottom to make a level base, and also run 'Make Solid' to close up some holes. Printed from Cura at 205 degrees in PLA on a Printrbot Simple Metal at 0.2mm layer height, 0.8 shell thickness and bottom/top thickness, 15% fill. Support everywhere grid structure. I set the overhang angle at 65 degrees, fill amount 25%, x/ydistance 0.5mm and z distance 0.14mm.