This is simply a derivative to be used by laser cutters that require DXF format files. I converted this using the latest version of Inkscape (0.48.4). Also had to move a few of the dots around and converts all the fonts to paths. Cutting took about 40 minutes through 4mm MDF. Update1: catan03-1.dxf do not use this without cutting an extra wheat tile Now has more coloured paths. Also I removed the dice value from the desert as it won't have one in the game. warning, this has the wrong number of tiles so you'll need an extra wheat tile from http://www.thingiverse.com/thing:127087 Purple - Boats, possible raster engraving Green - Text, possible raster engraving Black - Outlines, engrave cut Blue - Circle cuts Red - Tile cuts Update2: catan04-1.dxf - removed due to issues Update3: catan4-2.dxf & tree04-2-tested.dxf Fixed a few problems that were showing up in the lasercut software but don't have the materials to do a test cut of the full set of tiles. I've also created a new tested single tree tile as I believe this is the tile causing most of the problems so feel free to try this single tile out and see if it works.