Chain links to be used as bracelets, chains, belts, etc. The outer shape is hexagonal (radius 5mm, height 10mm), but it can be easily altered, as long as the male and female connectors stay the same. All STL files consist of the same model, the only difference is the number of items in the grid that goes from 1 to 100.Whether the ball links do actually work or not depends heavily on the material, the slicer and of course the printer used. If it does not fit, simply change the size of the head until you achieve the desired result. I have printed the links with a layer height of 0.1mm and a wall thickness of 1.6mm, infill 20%. The sturdiness achieved was sufficient for fashion/deco purposes. Overall the pieces seem to be a little too small, I will add a bigger hexagonal design shortly.