We setup a UStream for our Makerbot and wanted a way to hold the camera in-place (which didn't involve scotch tape.) We came up with this hinged mount! The mount is designed to fit a Microsoft Lifecam HD-6000 (around $20 on Amazon). The mount press-fits onto the hex bolt above the door of the Makerbot and is hinged so that the camera doesn't obstruct the operation of the door. Let us know if you print it! -ZWhen printing, make sure to orient the flat parts of the model down. We printed this on a Makerbot 2X in ABS on the lowest setting with 50% fill. No rafts, no supports. Happy Printing!