Derived from http://www.thingiverse.com/thing:20015 The Bareduino328 Plus brings you everything the Bareduino328 does with the added bonus of including what you need to regulate your power rail and keep your Bareduino's running smooth. Just one Bareduino328 Plus can be used to power several other Bareduinos or other five volt devices.Though the premise of the Bareduino is the use of the most minimal system to get the job done, not every project has a ready made five volt power source, and blasting your Bareduinos with anything else is likely to spell disaster.We have added a guide to making a simple regulated power rail without increasing the Breadboard footprint.Other Bareduino Resources: https://www.virtuabotix.com/resources.php?product=bareduinoWe hope that the guide will help you to regulate lots more than just your Bareduino!Guide: https://www.virtuabotix.com/feed/?p=628Get the Kit: http://www.amazon.com/gp/product/B007QGG1ZYMany thanks to Katherine and Luke for all your help with the guides!What you need:Bareduino Plus (kit http://www.amazon.com/gp/product/B007QGG1ZY includes): • 1 x P-DIP ATMEGA328P-PU programmed with Duemilanove Bootloader • 3 x Through-Hole 22pF Capacitors (2 for crystal and 1 for Analog power smoothing) • 1 x Through-Hole HC-49S 16 MHz Crystal (for clock) • 1 x 5 Volt regulator (peak current 2 A, nominal ) (L7805ACP Input Voltage = 7.5 to 18 V Output Voltage Low 4.8 Volts Nominal 5 Volts High 5.2 Volts) • 1 x 22 uF Capacitor (to stabilize power rail during rapid current draw.Other things you might need depending on how you are going to use the Bareduino:• Breadboard / Protoboard • Jumper wires • Grounding strap (chip is ESD sensitive)Follow the Bareduino Plus Guide: https://www.virtuabotix.com/feed/?p=628For all current and future Bareduino resources check out: https://www.virtuabotix.com/resources.php?product=bareduino