A nightstand for my Nexus 4 with a place for the Qi charger from xsource. First draft made from plywood. Then cut from 3mm acryl glass. The parts are interchangeable, so a material mix gives flexibility in design. The place for the charger is off the center, because the charging spot on the nexus is not in the center of the phone. Works also with a Nexus 5. Built at the FabLab Nürnberg http://www.fablab-nuernberg.de/Cutouts are made for 3 mm thickness. Plywood, MDF and acrylic glass work. Line thickness on the SVG is 0.1 mm for better visibility. For cutting out with a laser you have to decrease to 0.01 mm - at least for the Zing3040 at the FabLab Nürnberg.