This is a deck box designed to hold 100 sleeved cards + dice. Was designed for mtg, but it can probably work for any CCG. Some notes on printing: There are "shelves" for dice on both sides of the top part of the main shell. To get the overhang to print properly, I would highly recommend using skeinforge and this tutorial: http://www.protoparadigm.com/blog/2012/01/printing-with-support-extreme-overhangs/ The lid was drawn with an ever-so-slightly smaller length than the slot it fits in. I was able to print this and get the lid to fit the box right out of the printer using a .3 mm setting. If the lid is too big to fit, consider sanding it down. On the opposite hand, if you have lid that has a rather unsightly gap between it and the box, please let me know so I can release the untoleranced version of the .stl file. Hey! Can I get your opinion on something? Would you like a similar deck box for a 60 card deck? Tell me here: http://strawpoll.me/1282541