This is a full-color, 3D printable model of the Phial of Salts bottle from Bioshock Infinite. It is intended for printing on a 3D Systems full-color plaster or plastic printer, although it should work on any monochrome printer as well. It is an adaptation of Mooslug's Phial of Salts bottle, which can be found here: http://www.thingiverse.com/thing:97870. I took the 3 parts and placed them into a single assembly. I also modified the bottle so that it's one solid piece, rather than hollow. This makes it possible to print in weaker materials such as plaster. I then added Mooslug's artwork (the "Invigorating Salts" logo and the stopper flame) directly to the 3D model and saved it as a VRML. This full-color model can be printed on any full-color printer from 3D Systems or ZCorp (or through Shapeways). I have also attached a monochrome STL file, which can be printed on any printer, but will unfortunately not come out in color. Enjoy! And special thanks to Mooslug, who did the real heavy lifting with his original version. If you want to get this model in full color, I believe you can submit the wrl (aka VRML) model file w/ textures to Shapeways for production in sandstone, or a 3D Hubs member on a ZPrinter or 3D Systems x60.If you want to get this model in full color, you should be able to submit the wrl (aka VRML) model file to Shapeways for production in sandstone, or a 3D Hubs member on a ZPrinter or 3D Systems x60.