Customizable motor mount for a tricopter or similar things. Motor and screw diameter are customizable.Parameter Descriptions: / [Global] / screw_diameter_scale - Global scale for screw diameter. tube_diameter_scale - Global scale for tube diameter. / [Motor] / motor_angle - Rotate motor screw holes around center. motor_diameter - Motor diameter motor_screw_diameter - Diameter of motor screw holes. motor_screwcap_diameter - Diameter of motor screw caps. motor_shaft_diameter - Motor shaft diameter. motor_hole_dist_1 - Distance of motor holes motor_hole_dist_2 - Distance of motor holes / [Tube] / tube_diameter - Tube diameter tube_offset - Increases the distance of the motor hole from the motor. tube_wall - Wall thickness around the tube hole. tube_overlapping - Set the length of the tube hole. / [Servo] / servo_diameter - Diameter of the hole to mount the servo arm. servo_offset - Increases the distance of the hole to the motor. servo_wall - Wall thickness around the hole. servo_armlength - Servo arm length. This will change the width at the end where the servo mounting holes are. servo_length - Length of the servo mounting hole.