3D models for Emma Ohnoes, our physical cloud infrastructure indicator: https://github.com/brooklynmuseum/emma_ohnoes.Details on the Arduino Yún setup and schematics are available on Github: https://github.com/brooklynmuseum/emma_ohnoes. Print the scan of Emma-O in a transparent material--We used transparent blue PLA. For the base and lid we used an opaque black PLA but it can be any color you'd like. The holes in the back snugly fit a cat45 cable and usb micro cable. Some cable sizes might need larger holes, feel free to adjust the design on Tinkercad: https://www.tinkercad.com/things/kVchx57TCWp-emma-ohnoes-base/edit. The lid's upper opening can also be adjusted for different size models: https://www.tinkercad.com/things/aNXL1nowG2A-emma-ohnoes-lid/edit. Once all the models are printed, glue Emma to the lid. We used some Gorilla glue that was laying around at NYC Resistor. Your local hackerspace may have a similar adhesive.