This is my second version of the battery relocation support I've made. I realized that with V1 it was only possible to use it, when your battery packs have the exact same size as mine. So i made an other one. This part is designed to place the battery of your SCX10 over the front axle. It fits all SCX10 chassis. The first part fits over the bumper struts. The second part will replace the annoying supports of the RC box. It works with battery packs up to 150x50mm! I've provided two files for the plate, one is with openings for the cables of your battery. In case your cables coming out on the side and not on the top side. The other one is without. Update 25.05.2014: Just added a 5mm longer front support and a 10 mm shorter back support. To tilt back the battery in case you are not using the original RC box. Thanks for the good input powermik! Please hit "like" if you like it :-)Enlarge the two holes in the frame where the original RC box support was with a 3mm drill. Firmly press M3 nuts in the battery holder plate (in the provided hex holes) Maybe you have to scale it x10. My .stl files from Inventor turned out to be 1/10. Sorry about that.