SH Sanlianhuan Ledao HeliMX 8828 Landing SkidRC helicopter partThis spare is for the following SH helicopters: 8828 Eagle Power Heli MX 8828-1 Eagle Power Heli MX GyroIt will also fit:8827 X8 Pro Exceed 8827-1 X8 Pro Pioneer MX GyroMy first 3d print model, printed out fine.Thing-o-matic print time per piece:Normal: 1h 07min (estimated) Accelerated: 31-32min (true)It is a little more narrow than the original, because I had access to a Thing-o-matic that had only 100x100mm max printing surface.Lenght: 93,63mm Width: 44,40mm Height: 16,00mmVolume: 5,91cm2Holes need to be drilled to exact size after printing.NOTE: I had to drill the holes that fix the "landing skid" to the helicopter a little bit oval just to increase the spacing(about 1mm wider) of the mounting holes to achieve a perfect fit. (It could have been just a scale calibration problem)This is a pretty straight forward deal what we got here:-print -clean up -drill 4 holes for the screws (use 1mm for the lower, 3mm for the upper screws) -drill/enlarge the metal rod mounting holes to 5mm diameter