This entry takes care of some peculiarities of the life on Mars: The models print without any support. The scale is 1:100. You can see them in action on youtube. The hinges of Mathgrrl's fidget cube were used as a basis. Thanks! Many aspects are customizable: Have fun! The models print without support. (Use PLA with standard settings, Infill 10%, 2 Shells, 0.2mm layer height) The moving doors will stick a bit after printing. Apply gentle force to free them. Currently the distance between the moving doors and the station is 0.3mm. You can customize the distance using the customizer if you encounter issues using other printers/slicers. It seems the customizer does not like the children() function of OpenSCAD. So i had to remove it from the code and now you can customize the model.