This is a R/C transmitter kickstand with a holder for the Hawkeye Deluxe OpenLRSNG Transmitter module. The easiest way to build this is by grabbing the OpenLRS - TX Stand-All.stl. In addition to this you will need: 4 - M3 x 10mm bolts (button head is likely best) 4 - M3 nuts 1 - Decently long zip tie (7") The nuts and bolts are likely self explanatory. The zip tie is needed to hold the Hawkeye Deluxe on the stand as there are only top and bottom lips. Mine is printed with a 20% fill, 2 tops/bottoms, and 2 perimeters in PLA. You will need support for the bolt holes but that should be all.