A simple holder for mounting a glass bed raised by a few millimeters on a Kossel Mini. Suitable for Kossels with 15x15 extrusions. The glass bed shown on this photos has been cut out of recycled 5mm thick window glass, that has been found on the local buyback center. It didn't cost me a buck ;-)Note: The bed will be raised slightly by about 1cm, to have enough clearance for the large thermal fuses.Rafts: NoNoSupports: NoNoResolution: 0.2mm layer thickness0.2mm layer thicknessNotes: I used Slic3r with 0.2mm layer thickness and a 0.5mm J-Head nozzle.Parts used (BOM)