I took the ingress logo, and made it take shape when this object is viewed from an isometric viewpoint. Originally made it to try to get an invite - as well as an excercise in modeling strange shapes in a normal CAD program.You may have to flip/rotate/center this object to get it to lay flat on the build platform. Solidworks' XYZ axes are different than the default in most STL viewers. Feel free to play around with the .sldprt file, you can either see how I made it or make modifications.Print with support or be really good at bridging. Cube is 70x70x70 (mm). If you print without using suckback, the leftover strings will act as support in some cases. Cleanup is inevitable.Printed in ABS on a heavily modified Prusa Mendel. Be careful when removing it from the print bed, the cube edges are 6mm x 6mm and tend to be a bit spindly if you don't have really good layer adhesion.