Instagram @ckyeli Cable tearing to pieces? This is a quick fix to prevent the cable skin from shredding further. +Print with Raft. +Support is not necessary, but keep it on for safe print. +Standard settings etc. [IMPORTANT NOTE]() to keep in mind when using this repair kit: //The repair kit fit the cable tightly, remove gently only if necessary. //Model scale is ready for print. No further scaling required. // Made to share, Non-commercial Resolution Standard, 5% - 10% infill, 0.2mm layer height, 90 mm/s extruding speed and 150 mm/s traveling. Standard Setting from MakerBot