The Useless Box has been featured on Make Magazine http://blog.makezine.com/archive/2010/01/leave_me_alone_box.html, plus many other instructables and YouTube videos.We've designed this box and mechanism to make it easy for anybody with a laser (!) to build one of their own. We've added fresh assembly documentation on our kit page, under "resources" at: http://www.solarbotics.com/products/60005/resources/This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License.Update: Added hinge holes for miniature hinges. Discovered that you really don't need super loose hinges to make it work. Any decent small hinge will work!3mm Acrylic (don’t use clear - ug) 60W Helix Settings: 20 speed / 100 power Assemble with 4-40 x 3/8” hardwareParts List: 1 - Motor set (GM3 Motor and Accessory Wheel) 1 - Double-Pole, Double-Throw power switch 1 - Single-Pole, Double-Throw retract limit switch 1 - 4-conductor ribbon wire 1 - 2xAA Battery Pack 1 - Double-sided Sticky Tape 4 - Miniature Hinges 4 - Rubber Feet 2 - #4 x ½” Motor-mounting Screws 5 - #2-32 x 3/8” Limit switch / Finger mounting Screws 1 - #2 x 1/4” and #2 Washer set for Accessory Wheel 22 - #4 x 3/8” Bolts and #4 Nut sets 16 - #2 x 1/4” Hinge-mounting Screws