My fifth try at a car mount for my OnePlus One mobile phone in landscape mode(vertical). It will fit on the fan of my car, let's hope it does too on yours! I also have a horizontal version here: OnePlus One car mount - horizontal Comes in 2 parts so you don't need support material. You need two 3mm tie wraps to connect the two parts together. Success!There is one 13mm bridge for the USB-connector.if your bridges are sloppy cut that part away and the phone holder will still work fine. You'll need two 3mm tie wraps to connect the two pieces together. The holes are tight so you'll maybe have to scrape away some material and pull the tie wrap trough the holes with pliers. Success!