Watch the video! http://youtu.be/rLqNsIX6GRo For all who are looking for a landing gear fitting on Team Blackout copters. It is designed to be attached without any modifications of the frame. You can put it on like "shoes" and you're done. I only added two holes into the landing gear to get the two printed parts together. It is tested on my spider hex, but I think it should fit on all other Blackout copters, like: Blackout 330 Blackout Mini H Quad Hope you enjoy it! Please let me know if there's anything to make better. Using this landing gear, u will have free space of 7,7cm between ground and copter. -> So a GoPro won't get dirty ^^ UPDATE Dec, 12th 2014: Uploaded "Aero" Version of landing gear (more aerodynamic). The aero-landing (foot) should now be easier to print (larger honeycombs). UPDATE Dec, 5th 2014: Uploaded bolt.stl and removed old nailfix.stl. Bolt.stl is now sized correctly and fits perfect. Tested on my own. Please note: Enable raft printing to get best results. UPDATE Dec, 4th 2014: Uploaded bolt "nailfix" so you don't need any M3 screws. Please remember, I didn't test the nailfix yet, but you MUST! scale "nailfix" down to 75% ... 60%. Just busy with other things, but with more freetime, I'll scale the nailfix.stl by myself and reupload it again.1) Select your favourite type: normal or aero. 2a) If you have chosen normal design: download tb_spider_shoe_final.stl and tb_spider_landing.stl and 2b) If you have chosen aero desing: download tb_spider_shoe_aero.stl and tb_spider_landing_aero.stl 3) (optional) if you don't have any screws, download also bolt.stl and print it each landing part (2 times). 4) Please make sure that the parts are rotated (laying) on the ground, to get best print results. Enable also support printing! 5) Plug all parts together and fix them with screws or the printet bolt.stl. 6) Put on the landing gear on your copter like shoes. -> FINISHED