This is a really quick case for mounting a KV Team modded OSD from witespy/RTF Quads under a standard 36mm board (30mm x 30mm bolt pattern). I include the source file, please share your improvements with the other geeks. UPDATE1: tweaked dimensions UPDATE2: 3 is final version, 4 is with a gap underneath for more ventilation. I tested the PLA print with the board on for a couple hours with a naze on top of it and the temperature is okay.Don't seal up this board with a cover as it gets quite hot already. PLA may not be suitable for this print. Note the hole in the bottom aligns with the heat vents cut into the board.