This is a holder tor a typical well plate for a Zeiss Axiovert 200M microscope stage. Probably not going to be downloaded much, but I needed it, so might as well share. I built in my own supports for the overhanging lip. Also included the .scad file in case anybody wants to tweak anything.I could not get Cura to generate support for the lip. That's why I made my own support. However, Cura never wrote gcode to print my supports either....but Slic3r worked fine, so I suggest using Slic3r for this - if you get Cura to work, let me know how. Print it. Break off the support material. The holes on the edges are for set screws that can be used to level the insert - they are sized fro M3x0.5 screws, so they need to be tapped if you want to use set screws.