Remodel of Prototype Alpha. This model has a tanto-serrated blade. I've gone a step further than on alpha and added a belt secured scabbard. PLEASE NOTE: (I suggest using a dissolvable filament for the raft/supports, as some pieces may need either or both of those) To sharpen the blade, please use a sandpaper of desired grit. The blade can be sharpened to slice. After printing the blade and handle, insert the tang of the blade into the receiving hole made for it. If needed sand or use superglue to secure the blade in place. If desired, then print the scabbard designed for this knife. To use scabbard... Insert the blade of the knife into the hole designed for it. Then clip the scabbard onto your belt. For best results, use the finest resolution available to you. (ITS GOING TO ASK YOU TO SCALE TO FIT... THIS IS OKAY, AND WILL NOT ALTER YOUR KNIFE) I do not suggest using this knife as a weapon!
- 0 inches x 0 inches x 0 inches
- this product is 3D printed
- 16 available colors
- material is a strong plastic
- free delivery by Sep 25
- 0 parts