This flashlight stand is based on my Trustfire 3T6 flashlight stand (http://www.thingiverse.com/thing:618322). I have updated the OpenSCAD file to calculate the stand thickness so I recommend this as your starting part for any derivative designs. There are plenty of "Knock-off" makers so please verify the dimensions match your flashlight: 24mm on switch end, 24.5 on LED end, 32mm head head diameter, and 59mm for center-to-center of supports. If you need an additional size and are not familiar with OpenSCAD let me know and I can create & upload.My settings are below but any setup should work ok. 0.2mm layer height medium density fill (30%) normal (2) shells