There are probably a million versions of this out there, so here is mine. I made this for my dad as a "Thank You" for getting me my Zortrax M200 3D printer for Christmas. My Settings: 0.2mm layer height, 10-15% infill, ABS material I printed the base and cube together, but depending on your printer and preference you my want to print them separately, so I have also included the cube and base as separate objects I did use support material set to 10 degree support, but I believe its possible to print the base and cube together without any support. The .stl files units are set to Millimeters, so if you are working in Inches you will have to scale accordingly