This is a work in progress since I don't have my Cyclops and Chimeras yet, but all CAD models were build by me using E3D's drawings. All 3 designs that I am working on feature a hole for wiring that will allow a 2-pin XT60 connector to pass through and are described in more detail below. Side Mount (centered) This is for the cyclops only because the heater blocks for the chimera won't fit inside the circle of the platform. This mount places the nozzle in the center of the platform. Centering the nozzle offsets the heater block to one side. Minimum clearance between heater and platform is 1.3mm. Side Mount (offset) This is also a cyclops-only mount. It centers the heater block in the platform which offsets the nozzle by 3mm in Y. Minimum clearance between heater and platform is 2.7mm.