History trembled the day the Rubber Band Blaster-32 was first forged. Squeeze the trigger briefly and fire once, hold it down and release a torrent of rubber bands. Quickly reload by simply replacing the barrel and keep going. Slow motion video: https://www.youtube.com/watch?v=CEQ0T4qCQKU Videos: Reloading: https://www.youtube.com/watch?v=m4xSol8nA3I Assembly: https://www.youtube.com/watch?v=i-P6L7N33EY Uses #32 rubber bands In addition to the printed parts you will need: 1- Right Angle, Single Sided Geared Motor 1- 2xAA Battery Holder 1- Large, Red Classic Momentary On Switch 1- 7" by 3/8" Dowel 1- 2.5" by 3/8" Dowel 1- Screw Eyes 5/16" Inside Diameter 1- Screw Eyes 1/8" Inside Diameter 1- 5" Two Conductor Insulated Wire 2- 3" Single Conductor Insulated Wire 3- #6x5/8" Screws 2- #4x1" Screws 1- #2x1/4" Screw 1- 4.5' Nylon String Use your own non printable parts or order the kit with the non printable parts online at http://www.shuttlebaylabs.com PS This was part of a KickStarter that I did last summer: https://www.kickstarter.com/projects/1260445854/automatic-rubber-band-blaster-kit