VESA mounting plate for my Pi case's Should fit both B and B+ versions The cases are available here https://www.3dagogo.com/3dagogo/designs/natkoPI2modBplusCase https://www.3dagogo.com/3dagogo/designs/natkoPI2modBcase Sorry need the cashPrint n break off the support material, the latch may need a bit more effort to clean back the support material with a file or sharp craft knife. The mounting holes may need running through with a 4mm drill bit. Printed no support, 3 wall's, 20% infill, 0.3 layer, nozzle is 0.46 on my printer. You will need: 4 Off M4 screws (length to suit application)