The wireless charging feature of Samsung Galaxy Note 3 is really neat. You can find a wireless charging kit as cheap as about 30$ like this: http://www.amazon.com/CHOETECH-Wireless-Compatible-Flip-Case-Charging/dp/B00FPFM4AY/ref=sr_1_1?ie=UTF8&qid=1426828718&sr=8-1&keywords=galaxy+note+3+wireless+charging So every night you put your phone on the pad, next morning you get a fully charged phone. The problem is you have to put that small pad below the center on that large phone, or it will not work properly. So I created this thing. The charging pad should be perfectly slided in, then just put your phone on it for charging. It makes the wireless charging easier, and looks really cool even without a phone on it! Qi is a wireless charging standard, so this thing might work on other phones as well, as you might want to modify the model to make sure the charging pad is on the center of the phone. Print with 20%~30% infill, recommended shell thickness 0.8mm+. This model is designed to use a fair less amount of material, about 19.42m, 1.75mm diameter PLA on 20% infill, 1mm shell. The word on the photo model is added by the "3D Builder" from win8 app store... Added 3/20/15: The .dwg file is created by AutoCAD student version 2015. Lower versions might be unable to open it. Changed link (and price) to a fully usable Note 3 kit. The old link which include charging pad only can be searched by "Qi charging pad". Print without support should works fine. My 3D printer is small so I have to print it vertically with support, but it works fine as well. Just print it, slide the charging pad in and enjoy.