This will be 3D printed near you and delivered to your door by May 12
Loading
Wanted something to mount my Raspberry Pi running OctoPrint out of the way at the back of the printer. See instructions for screws etc....4 x M4 x 10mm to mount bracket to PSU 4 x M3 Nuts - Push into nut traps 4 x M3 x 6mm to mount PI to bracket The PI mounting screws are tight, be careful and they will go (I did not have any M2.5's as should be used.....) OpenSCAD attached for any adjustments as required..... There is also a cable tie area on the right of the bracket to allow you to strap a UBEC / 7805 voltage converter for simple PI powering through the GPIO pins from the PSU....
Raspberry Pi B+ / 2 12v 30A PSU Mount
Please wait while we prepare the order
$ 0.00 + free delivery
Sorry we had trouble getting the 3D files. Download them yourself and upload them here to place an order.
View files
- 0 inches x 0 inches x 0 inches
- this product is 3D printed
- 16 available colors
- material is a strong plastic
- free delivery by May 12
- 0 parts
Order summary
Raspberry Pi B+ / 2 12v 30A PSU Mount
Color:
Quantity:
Subtotal
$
Delivery (May 11 - May 13)
Free
Total
$