This is my version of the Android mascot, real name Bugdroid. He's somewhat posable and almost a perfect replica of the 2D mascot we all love. He's as tall as credit card and made to be printed in one color, but printing the base in another color looks better. As usual the print works fine on my printer but if you have some problems with your print please comment so i can fix the model.Rafts: Doesn't MatterDoesn't MatterSupports: NoNoIf you are feeling lazy just download the file named Print_1.stl and print it. If you want to have a simple stand print either Stand.stl or Stand_text.stl (stand_text.stl has "Android" written in the Android font), for both stands you want to use a high amount of perimeters for best result. Assembly: either print "print 1.stl" or do the layout yourself you'll need: 1 Body.stl, 1 Head.stl, 1 Neck.stl, 2 leg.stl, 2 Outer_arm.stl, 2 Inner_arm.stl, 2 Pin_arm.stl, 2 Pin_arm2.stl. Clean the printed parts from any printing artifacts and start assembly by putting the legs and the neck in the body, put on the head. Start assembly of the arms by putting the short pins in the hole closest to the edge on the outer arm pieces and the long pins in the hole closer to the center, when done press on the inner arm pieces with the long pin going trough the hole. When the arms are done, just stick them in the body. If you have printed a stand simply stand Bugdroid on it. If you have some problems printing the antenna, use the stl file "headV2-experimental.stl" instead and print two "antenna-experimental.stl"