Do you wonder why your clothes are always wrinkled? Tired of spending countless hour ironing your shirts and slacks and/or skirts and blouses? Do you feel like your life is a frustrating black and white segment on an infomercial? If only you had a way to hang up those clothes instead of having piles of clothes on the floor. Now you can build a cheap or mostly free ersatz closet with this handy dandy 4-way connector and simple pieces of round wood (from trees!). Stop being in the black and white segment and throwing your wrinkly clothes down with a frustrated scowl on your face and join me in the color segment, where we smile all the time! Build a better place to hang up your clothes, you slob! Connects four (4) 2.5" dowels. Connect all the dowels and make a cheap or mostly free place to hang up your clothes. Now with a little hole to put a screw through! Hangers not included. Dowels not included. Rotate so that the 3 connectors are on the bed. If you do, there's no need for support. If you don't you'll probably need lots of support, so don't just rotate that model. Print @ .2 mm per layer. I printed @ 50% infill, to make sure it's extra beefy, so the clothes don't end up in a pile on the floor again. Print on a raft to make sure that first layer adheres so dimensions are correct. Deftly modeled in 123d Design.