Yet another apple watch stand. This one is built from 3 parts. Designed so that the cable is hidden. Also added some holes in the base that are sized to fit a few stacks of American pennies which makes the base quite heavy and stable. The cable is routed through all three parts and out the back of the base. EDIT: Added a stem part version with a steeper angle for the charger holder.Print at 0.2-0.3 layer thickness, and 15-20% fill. Should fit together without glue, but as with all 3D prints, your printer may vary. Scale parts up or down 1-2% to make them fit if needed.