Part two of two of a wedding present. Inspired by Japanese Cherry Blossom PaintingsPrinting Instructions 1) PLA at 205?C Heated Bed at 50?C 2) Layer height of 0.1mm 3) Printed reeeeeeeeeaaally slowly (Max speed 70mm/s with outlines ~20mm/s) 4) Printed at a extrusion width of 0.3mm 5) 4 shells (outline and top/bottom) 6) Switch filament color at 0.4mm height ~This was the 2nd hardest print I've ever attempted~ Time: ~8 hours .STL Basic print file - two parts Part 1: The base part of the painting frame and tree outline Part 2: Cherry Blossoms (will overlap with Part 1 model) .factory Simplify3D file that has all the print settings and model pre-setup. The Settings should match the "Printing Instruction" .mix MeshMixer file of .STLs Part 1 and 2 for your editing pleasure .SLDPRT Original Solidwork file used to create Part 1 .STL file for your editing pleasure .gcode & .3xg The print-ready files used to print the model. Should match the "Printing Instructions" settings for PLA. Requires Sailfish firmware.