Mounting bracket for 2x Adafruit Neopixel Stick (8 RGB LEDS) See: http://www.adafruit.com/products/1426 Strips are soldered together on the reverse side and a piece of thin servo cable is used to make the connection to the flight controller. 4x 2.5x6mm self tapping screws are used to fix the LEDs to the frame. Can be programed from Cleanflight. Thanks to BoltRC for a fantastic frame, and for providing the base armor STL's that this is modified from. Update: 27.08.15 - I have uploaded the extended and reversed version of this for the common neopixel clone bars out there :)