Nieuwe versie van de kifkit lamp behuizing. De kunststof schuifschakelaar kan de bestaande drukschakelaar op de print ingedrukt houden zodat het lampje aan blijft. New version with slide switch, so the light can stay on continuesly. No need to modify the PCB, the existing momentary button can stay, it will be pressed by the plastic slider. Get one printed: https://www.3dhubs.com/den-haag/hubs/leidse-makerspaceTip: Printers vary, if you want to print multiple first test print 1. If you print the switch in Glow In The Dark PLA the light is easyer to find in the dark.