Fanduct for replacing original 40mm Fan in buttom, to a focused 80mm fan, placed under the frame. The holes need to be drilled out with a 2,5mm drill, and tapered a 3mm metric thread. Then mount the Fan, and connect it to the mainboard instead of the 40mm fan. Cut the cable binder holde the belt cable for the display. Mount the fanmount in the holes, where the 2 cablebinder where connected. The fanduct will now hold the belt cable. Material used: 4x M3x30 4x M3x10 1x 80mm fan with a molex connector (or solder to the original wire)