This will be 3D printed near you and delivered to your door by May 02
Loading
This unit blocks hair spray from being sucked into the cooling fins & fan. v.3 has a front deflector with the wings moved in closer. No melt down after several hours of run time. I used 15% density, 3 walls, 3 shell & 3 layer height. Hair spray with crazy glue at the corners. 3 mm holes need to be cleaned and may need modification for a perfect fit. You will need to lay v.3 flat on the build plate. Shield is attached by two short 3 mm screws at the bottom. Start screws & nuts on fan, then push shield into place. You should hear a click. The upper bolts go into the cooling fins. Some Dremal action required.
Hair Spray Shield
Please wait while we prepare the order
$ 0.00 + free delivery
Sorry we had trouble getting the 3D files. Download them yourself and upload them here to place an order.
View files
- 0 inches x 0 inches x 0 inches
- this product is 3D printed
- 16 available colors
- material is a strong plastic
- free delivery by May 02
- 0 parts
Order summary
Hair Spray Shield
Color:
Quantity:
Subtotal
$
Delivery (May 01 - May 03)
Free
Total
$