This thing incorporates elements from a number of designs but most resembles the feet that I chose as the base of the remix. About the name and the vibration resistance aspect...I HAVE NO IDEA IF THIS ACTUALLY WORKS! I should do some tests but have not gotten around to it. It could help, it could make no difference, it could even be a negative! Even without the springs I like the feet as it gives me some room under the printer for a little drawer!There are two choices of leg style, one with straight corners and the other where they are beveled. I printed everything with a .2 layer height in PLA. Note that I use two springs in the front but three in the back as it is much heavier. The springs are a big variable and will depend on your material, your infill percentage, whether you have the filament spool on the back (I do not), etc. You will need to experiment. There are other things that could be used as well.