This is my heavy duty Dropcam mount. I liked the first one I made (http://www.thingiverse.com/thing:881044) and I wanted a little more flexibility in view angles, so I made this one. Link to Dropcam: http://goo.gl/wkz429 Warning this will not fit the Nest cam. The diameter of the nest cam is different then the Dropcam. My Dropcam is live and can be viewed here: http://printrbot.rocks/To adhere the mount to the print bed I use 3M VHB tape. LINK to tape used: http://amzn.to/1V30GQT I used 2 1/4"-20 3/4" stainless steel bolts and 2 1/4"-20 stainless steel nuts to assemble this. Also be sure to print 2 of the nut knobs. Optional: I mounted the camera upside down and then zip tied the cable to itself (see pictures) to release the cable of strain. I had one cable die due to the motion of the print bed.