Charging stand for the OG Pebble watch. This is based upon a design of mine for the Pebble Time. The base has a cutout for gluing in coins or other weighted objects for added stability.For best results, print this on its side. Support material is not necessary. I printed with 3 perimeters and 3 solid horizontal layers on top and bottom. Infill of 20% or more should do the trick on this one. The bottom cutout is deep enough for 12 US pennies to be glued in. I had to use a little bit of tape on the back side of the magnetic charger to shim it out a tiny bit.