This hook was designed in Onshape, web based 3D-modeling software. Attach the hook to the wall and when hooking the wash basin make sure you place the edge of the basin perpendicular to the wall. In other words the edge in the pictures above is parallel to the wall because it's already hooked.Printed using Makerbot Replicator 2X When loading STL file into Makeware, make sure the model is positioned on the platform laying on its side, see image above. 10% infill 6 shells 0.20mm resolution Print with supports. Takes 1 hour and 27 min. to print, using around 27.3 grams of filament.