About me

Minimum $30 for any part, free consultation about printability. Generally, $10 per part setup, and $1 per cm^3 but can be somewhat lower or higher depending on specifics and circumstances.

If you want a small, cheap part and are willing to wait a day or two for it, I can *maybe* help you out. The part had better be readily printable without much screwing around. You will need to send an STL file up-front for me to evaluate, or a link to a printable file.

I prefer to work with folks that need some design assistance or consulting, and are open to different ways to fabricate parts and prototypes.

Chicago designer and founder of USA-OK Industries, a made-in-America furniture brand. Trained industrial designer, Michigan State University. Army Iraq Veteran OIF1.

I intend this as an added-value for people that want to hire me to design products or parts, NOT as a low-cost quick-print for people that want cheap parts. If you want a $10 doodad for your Xbox, today, I'm probably not the guy for you.

Please let me know if you need ABS or PLA, if there is a particular color you need, or if you don't have firm preferences.

Please specify the actual dimensions of the part, and whether it was modeled in mm or inches.

If you have a part that could be fabricated in some other way (by laser cutting sheet acrylic, for instance, or just by machining it out of aluminum or wood) then let me know and I will try to make it by the most appropriate method.