About me

M.R. Print delivers reliable, dimensionally accurate parts at a fair price. Please note: We operate as a shipping-only service to ensure fast, dedicated turnaround.

We run a fleet of high-performance machines, including fully enclosed Voron 2.4s and tuned Bambu Lab FDM systems, optimized for engineering materials like ABS/ASA and high-quality PETG/PLA. Filament is dried before printing, and every job gets a rigorous visual QC. Typical same-day response.

What to expect:
- ±0.20 mm under 100 mm (±0.30 mm larger)
- Caliper spot-checks when you supply critical dimensions
- Heated chambers to reduce warp on ABS/ASA
- Light support removal and edge cleanup included

Defaults (customizable):
- 0.20 mm layer height (0.12–0.32 by request)
- 3 perimeters; 5–7 top/bottom layers (~1.0–1.4 mm at 0.20)
- 20% cubic/gyroid infill
- Nozzles: 0.25 / 0.40 (standard) / 0.60 / 0.80
- Materials stocked: ABS, ASA, PETG, PLA

File and ordering:
Upload STL or 3MF in millimeters and note any critical dimensions and desired fit (press, slip, clearance). Recommended minimum wall: 1.2 mm. Small holes can print undersized—tell us if you need ream/clearance. We may adjust orientation/supports for strength and finish.

Policies:
Free reprint for manufacturing defects. Design changes may incur an additional charge.

Other services:
CO2 laser cutting/engraving up to 300 × 200 mm (acrylic, plywood, card, leather; anodized-aluminum marking).

Thank you for considering M.R. Print. We look forward to helping with your next part.