Ace Minis Sp.Mv.153 Stiermann Spg Et Mpbsv Abbot Spg Modular Tank
The SP.MV.153 Stiermann SPG is a Sci-Fi Modular Tank with lots of options, allowing the avid Modeler or Wargamer to 3d print and field tanks with limitless configurations. This kit is fully compatible with the SP.MV.151 Dorothy HT.
Pictures show are just examples of how you can build your tanks, with options to field the tank with 2 main weapons (Howitzer or Siege Mortar), 2 types of Tracks, addon bits such as pintle mounted weapons, track armour, Dozer Blades, etc.
This kit is fully printable in a Resin Printer with a print volume of at least 68x120x150mm, like an Anycubic Photon or Elegoo Mars. The model is also Magnet ready, using only 3x1mm, 3x2mm, 5x1mm and 5x2 Magnets for turret, weapons, tracks and hatch.
The kit is also Pre-Supported and has already been pre-hollowed for resin Printing. Lychee files are also included.
Dimensions:
96mm Wide x 180mm Long x 83mm Tall
Some notes about the Files:
- All Weapons, Tracks etc, have slots for magnets.
- File names indicate the section they belong to, (Main Hull, Side Hull, Sponson and Frontal Turret, etc.), the quantity to print, and if a mirror needs to be made to obtain it's twin. Finally, files indicating Hollow, are pre-hollowed models with infill (to ensure no deformation will occur while printing).
Examples:
"Hull - Exhaust x2.stl" => Print 2 parts, Etc.
Pictures show are just examples of how you can build your tanks, with options to field the tank with 2 main weapons (Howitzer or Siege Mortar), 2 types of Tracks, addon bits such as pintle mounted weapons, track armour, Dozer Blades, etc.
This kit is fully printable in a Resin Printer with a print volume of at least 68x120x150mm, like an Anycubic Photon or Elegoo Mars. The model is also Magnet ready, using only 3x1mm, 3x2mm, 5x1mm and 5x2 Magnets for turret, weapons, tracks and hatch.
The kit is also Pre-Supported and has already been pre-hollowed for resin Printing. Lychee files are also included.
Dimensions:
96mm Wide x 180mm Long x 83mm Tall
Some notes about the Files:
- All Weapons, Tracks etc, have slots for magnets.
- File names indicate the section they belong to, (Main Hull, Side Hull, Sponson and Frontal Turret, etc.), the quantity to print, and if a mirror needs to be made to obtain it's twin. Finally, files indicating Hollow, are pre-hollowed models with infill (to ensure no deformation will occur while printing).
Examples:
"Hull - Exhaust x2.stl" => Print 2 parts, Etc.
